Raw material humidity is too high or too low: The biomass briquetting machine is suitable for processing raw materials with a humidity between 14% and 18%. If the humidity is too high or too low, it will affect the discharge of the briquetting machine and even cause The briquetting machine is clogged. The feed amount is too large or too small: an excessive feed amount will cause the briquetting machine to be unable to discharge materials in time, while a feed amount that is too small will make the briquetting machine inefficient and unable to discharge materials. Mold wear or damage: The mold is the core component of the briquetting machine. If the mold is worn or damaged, the briquetting machine will not discharge material. Unstable motor voltage: If the motor voltage fluctuates too much or the power supply voltage is unstable, the briquetting machine will not start properly or even work properly.
|
모델 |
용량 |
연탄 크기 |
구멍 양 |
|
|
MK-550 |
55 kw |
1t/h-1.5t/h |
32*32 밀리미터 |
36개 |
|
MK-750 |
75 kw |
1.5t/h-2t/h |
32*32 밀리미터 |
54개 |
|
MK-900 |
90 kw |
2t/h-2.5t/h |
32*32 밀리미터 |
72개 |
|
MK-1600 |
160 kw |
2.5t/h-3t/h |
32*32 밀리미터 |
120개 |
솔루션:
1. 조정 습도 의 원시 재료: First, 조정 습도 의 원시 재료, 및 사용 원시 재료 a 습도 의 14% to 18% for 생산.
2. 제어 공급 양: 공급 양 필요 to be controlled according to the requirements of the 연탄 machine, and should not be too large or too small.
3. 교체 금형: 확인 여부 금형 마모 또는 손상 및 교체 시간.
4. Check the stability of the power supply voltage: Check the stability of the power supply 정기적으로 to 피하기 과도 전압 변동 또는 불안정 전원 공급 전압.
5. 스크린 원재료: 언제 처리 바이오매스 원재료, the 원시 재료 should be screened to ensure that the raw materials do not contain excessive debris or impurities.